Anglomoil Food Machinery Grease
General product information
Anglomoil can offer two technologically advanced and high performance greases for use in the food industry. Both greases are built around a complexed overbased calcium sulphonate soap which is outstanding for its exceptional mechanical stability, very high load carrying properties, excellent thermal stability and most of all for its resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as lithium complex, aluminium complex and polyuria.Anglomoil Food Machinery Grease contains a white mineral oil of high purity and meets a wide range of performance requirements experienced in food manufacturing plants.
Anglomoil Food Machinery Grease Heavy Duty is a full synthetic grease containing a high viscosity poly alpha olefin base oil and is designed for heavy industrial use.
BENEFITS
Thermal & Mechanical StabilitySuperior mechanical stability versus other thickeners, particularly in the presence of heat and water.High drop point typically in excess of 300 degrees CLoad Carrying & Wear ProtectionExcellent EP and AW properties inherent in the thickener.Does not require use of additional additives. Resistance to Water Excellent resistance to water washout.Corrosion ResistanceSulphonates are known and used for their excellent rust prevention properties.This property is inherent in the thickener.Easily outperforms other technologies.Resistance to OxidationThe use of premium antioxidant and high quality base oils ensures excellent thermal and oxidation stability.Bearing life performance in excess of 240 hours.
APPLICATION AREAS
Anglomoil Food Machinery Greases are designed to provide superior performance at elevated temperatures and under wet corrosive conditions. They meet H1 standards for incidental food contact.
TYPICAL Properties
PERFORMANCE
sese Heavy Duty
NLGI Grade22
ColourCreamCream
TextureSmoothSmooth
Dropping Point300C318C
Consistency-worked penetration 60 strokes280280
Mechanical stability, 100,000 strokes %2.5%4.5%
Roll stability, % change3.1%2.5%
Timken OK Load kg2727.2
4 Ball EP LWI kgf6250
Weld point kgf500400
4 Ball Wear - scar diameter mm0.380.50
Rust Test, ratingPassPass
Salt Fog Corrosion, hours to failure300300
Copper Corrosion rating1b1b
Wheel Bearing Leakage, grams4.03.5
Bearing Life Performance, hours120260
Bomb Oxidation, psi drop after 1000 hours9.06.0
Water Washout at 80C, % lost3.53.5
Oil Separation, % loss0.20.1
Low Temperature Torque at -40 C N-m10
Low Temperature Torque at -18C N-m start1404
after 60 min247
Low Temperature Torque at -22C N-m start3500
after 60 min600
Base Oil Viscosity at 100 C cSt8.437.5
These values are typical, they are not a specification
For information on safe handling and use of these products, refer to the Material Safety Data Sheet.